| ปี พ.ศ. 2560 |
| 1 |
Non-isothermal crystallization kinetics of bismuth germanate glass-ceramics |
| 2 |
Sintering temperature-microstructure-property relationships of alumina matrix composites with silicon carbide and silica additives |
| 3 |
Effects of processing parameter on phase transition and electrical properties of lead-free BNKT piezoelectric ceramics |
| 4 |
Electrical properties of sodium potassium niobate/mullite ceramic composites |
| 5 |
Dielectric properties of Ba1-xSrx(Fe0.5Ta0.5)O3 giant dielectric ceramics |
| 6 |
Chemical profiles and antimicrobial activities of Thai propolis collected from Apis mellifera |
| 7 |
Piezoelectric and ferroelectric properties of KNbO3 added Bi0.5Na0.5TiO3 ceramics |
| ปี พ.ศ. 2559 |
| 8 |
Dielectric properties of Sr1-xBaxFe0.5Nb0.5O3; (x = 0.0, 0.1 and 0.2) ceramics prepared by the molten salt technique and their electrode effects |
| 9 |
Model for the dielectric constant for 0-3 piezoelectric-polymer composites |
| 10 |
Reaction sintering of alumina/mullite nanocomposites from nano-sized starting powders |
| 11 |
Effect of sintering temperature variations on fabrication of 45S5 bioactive glass-ceramics using rice husk as a source for silica |
| 12 |
Effects of dwell time sintering on microstructure, Piezoelectric and mechanical properties of modified BNT-based ceramics |
| 13 |
Influence of curing on calcined kaolin-based geopolymer |
| 14 |
Electrical properties of modified BNT based lead-free ceramics |
| 15 |
Phase structure, microstructure and electrical properties of BCZT ceramics prepared by seed-induced method |
| 16 |
Fabrication and properties of mullite ceramics from Ranong kaolin |
| 17 |
Electrical properties of BNKTZ ceramics as a function of calcination temperature |
| 18 |
The effects of sintering temperature on the dielectric properties of Sr(Fe0.5Nb0.5)O3 doped with Ba(Zr0.25Ti0.75)O3 |
| 19 |
The fabrication and dielectric constant of (1-3) piezoceramic polymer composites |
| 20 |
Effects of NaNbO3 crystals on electrical properties of K0.5Na0.5NbO3 ceramics |
| 21 |
Tuning the band gap of ZnO thin films by Mg doping |
| 22 |
The electrical properties of BCZT lead-free ceramics induced by BaZrO3 seeds |
| 23 |
Effect of particle sizes of BaTiO3 (BT) seed on microstructure and electrical properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 |
| 24 |
Effect of electrode on electrical and ferroelectric behavior of modified BNT lead-free ceramics |
| 25 |
Influence of sintering temperature on electrical properties of modified-PZT piezoelectric ceramics |
| 26 |
Effects of BST on optical and dielectric properties of Na2O-B2O3-SiO2 glasses |
| ปี พ.ศ. 2558 |
| 27 |
Influence of BaFe12O19 on structure, sintering and bioactivity behavior in bioactive glass |
| 28 |
Influence of BaFe12O19 on structure, sintering and bioactivity behavior in bioactive glass |
| 29 |
Mechanically improved antibacterial polycaprolactone/propolis electrospun fiber mat by adding bacterial nanocellulose |
| 30 |
The preparation of electrospun fiber mats containing propolis Extract/CL-CMS for wound dressing and cytotoxicity, antimicrobial, anti-herpes simplex virus |
| ปี พ.ศ. 2557 |
| 31 |
Preparation and dielectric properties of barium iron niobate by molten-salt synthesis |
| 32 |
Bactericidal effects of propolis/polylactic acid (PLA) nanofibres obtained via electrospinning |
| 33 |
Electrical properties of calcium phosphate/BZT bioglass-ceramics prepared by incorporation method |
| 34 |
Study of strontium ferrites substituted by lanthanum on the structural and magnetic properties |
| 35 |
Effect of Mg doping on optical properties of ZnO films by ultrasonic spray pyrolysis |
| 36 |
Effect of Zn2+ and Nb5+ Co-doping on electrical properties of BCZT ceramics by the seed-induced method |
| ปี พ.ศ. 2556 |
| 37 |
Preparation of titanium-doped indium oxide films by ultrasonic spray pyrolysis method |
| 38 |
Electrical and optical properties of ITO/Au/ITO multilayer films for high performance TCO films |
| 39 |
Effects of rice husk as a precursor on crystallization kinetic of glass ceramics derived from 45S5 bioglass? |
| 40 |
Effects of rice husk as a precursor on crystallization kinetic of glass ceramics derived from 45S5 bioglass® |
| 41 |
Microstructures and dielectric relaxation behaviors of pure and tellurium doped CaCu3Ti4O12 ceramics prepared via vibro-milling method |
| 42 |
Fabrication of P2O5-CaO-Na2O glasses doped with magnesium oxide for artificial bone applications |
| 43 |
Dielectric properties of strontium iron holmium niobate ceramics |
| 44 |
Physical properties and bioactivity of nanocrystalline hydroxyapatite synthesized by a co-precipitation route |
| 45 |
Properties of hydroxyapatite/zirconium oxide nanocomposites |
| 46 |
Preparation of lithium-mica glass-ceramic containing Cr2O 3 as the machinable insulator |
| 47 |
Effect of camphor addition on mechanical properties and bioactivity of P2O5-CaO-Na2O bioactive glass |
| 48 |
Phase formation, microstructure and electrical properties of mica glass-ceramics containing Cr2O3 produced by heat treatment |
| ปี พ.ศ. 2555 |
| 49 |
Study of mechanical properties of magnesium oxide doped alumina (Al
2O
3) and yttria stabilized zirconia (YSZ) composite for medical applications |
| 50 |
Fabrication of P
2O
5-CaO-Na
2O glasses doped with magnesium oxide for artificial bone applications |
| 51 |
Reinforcing potential of micro- and nano-sized fibers in the starch-based biocomposites |
| 52 |
Effect of crystalline morphology on mechanical properties of PPB polymer nanofiber composite |
| 53 |
Study of mechanical properties of magnesium oxide doped alumina (Al
2O
3) and yttria stabilized zirconia (YSZ) composite for medical applications |
| 54 |
Antimicrobial effect of brazillian propolis/polycaprolactone polymer on some human pathogenic bacteria |
| 55 |
Ultrasonic extraction of thai propolis for antimicrobial and antioxidant properties |
| 56 |
Preparation of polycaprolactone/ethanolic extract propolis nanofibers films |
| 57 |
Fabrication of P
2O
5-CaO-Na
2O glasses doped with zinc oxide for artificial bone applications |
| 58 |
Fabrication of transparent lead-free KNN glass ceramics by incorporation method |
| 59 |
Preparation of polycaprolactone/ethanolic extract propolis nanofibers films |
| 60 |
Microstructures and dielectric relaxation behaviors of pure and tellurium doped CaCu
3Ti
4O
12 ceramics prepared via vibro-milling method |
| 61 |
Property development of hydroxyapatite ceramics by two-step sintering |
| 62 |
Effect of metal oxide nano-particles addition on physical properties of hydroxyapatite |
| 63 |
Phase formation of hydroxyapatite particles at different calcination temperatures |
| 64 |
Effects of NiO nanoparticles on the magnetic properties and diffuse phase transition of BZT/NiO composites |
| 65 |
Effects of Mn and Sr doping on the electrical properties of lead-free 0.92BCZT-0.08BZT ceramics |
| 66 |
Phase formation, dielectric and ferroelectric properties of Mn, Al Doped BCZT ceramics by molten salt method |
| 67 |
Influences of cobalt dopant on the phases, microstructures and dielectric properties of PZT ceramics |
| 68 |
Preparation and characterization of Al 2O 3-25 mol% ZrO 2 composites |
| 69 |
Effect of cesium and cerium substitution on the dielectric properties of CaCu 3Ti 4O 12 ceramics |
| ปี พ.ศ. 2554 |
| 70 |
Improvement of ferroelectric and dielectric properties of annealed pyrochlore free PZT based ceramics |
| 71 |
Effects of annealing time on ferroelectric and piezoelectric properties of B2O3 doped Ba(Zr0.07Ti0.93)O 3 ceramics |
| 72 |
Fabrication of ferroelectric glass ceramics from (K0.5Na 0.5)NbO3-SiO2-Al2O3 glass system |
| 73 |
The effect of GeO2 and In2O3 doping on the dielectric properties of CaCu3Ti4O12 Ceramics prepared via vibro-milling method |
| 74 |
The structural and electrical properties of (1-x)BaTiO3 - XBaFe0.5Nb0.5O3 ceramics |
| 75 |
Effects of B-site doping on piezoelectric and ferroelectric properties of Pb0.88Sr0.12(Zr0.54Ti0.44Sb 0.02)(1-y)-(Zn1/3Nb2/3) yO3 ceramics |
| 76 |
Phase evolution and dielectric properties of barium zirconate titanate - Barium iron niobate ceramics |
| 77 |
Phase formation and dielectric properties of Ba0.9Sr 0.1[Ti1-x(Fe0.5Nb0.5) x]O3 ceramics |
| 78 |
Preparation and electrical properties of (1-x)Ba0.9Sr 0.1[Ti0.8(Fe0.5Nb0.5) 0.2]O3-xBiZn0.5Ti0.5O3 ceramics |
| 79 |
Dielectric and ferroelectric properties of annealed B2O 3 doped Ba(Ti0.9Sn0.1)O3 ceramics |
| 80 |
Dielectric characteristics and tunability of barium zirconium titanate ceramics prepared by two-step sintering method |
| 81 |
Dielectric and ferroelectric properties of annealed B2O 3 doped Ba(Ti0.9Sn0.1)O3 ceramics |
| ปี พ.ศ. 2553 |
| 82 |
Phase transition behavior in (1 - X)PZT-xBiAlO3 ceramics |
| 83 |
Effects of vibro-milling on relaxor ferroelectric behavior and phase transition of lead-free Ba(Zr0.25Ti0.75)O3 ceramics |
| 84 |
Impedance study of giant dielectric permittivity in BaFe0.5Nb0.5O3 perovskite ceramic |
| 85 |
Processing and properties of nanoporous hydroxyapatite ceramics |
| 86 |
Effects of vibro-milling on relaxor ferroelectric behavior and phase transition of lead-free Ba(Zr0.25Ti0.75)O3 ceramics |
| 87 |
Phase transition behavior in (1 - X)PZT-xBiAlO3 ceramics |
| 88 |
Dielectric properties of lead-free solid solution of Bi 0.487Na0.487La0.017TiO3 and BaTiO3 |
| 89 |
Sintering and mechanical properties of dense hydroxyapatite nanocomposites |
| 90 |
Sintering and mechanical properties of dense hydroxyapatite nanocomposites |
| 91 |
Influence of B2O3 on electrical properties and phase transition of lead-free Ba(Ti0.9Sn0.1)O3 ceramics |
| ปี พ.ศ. 2552 |
| 92 |
Phase formation and electrical properties of BNLT-BZT lead-free piezoelectric ceramic system |
| 93 |
Effect of the solid-state synthesis parameters on the physical and electronic properties of perovskite-type Ba(Fe,Nb)0.5O3 ceramics |
| 94 |
Effect of heat treatment conditions on properties of lead- free Bi 2GeO5 ferroelectric glass ceramics |
| 95 |
Phase evolutions and electrical properties in BaTiO3-BaFe 0.5Nb0.5O3 ceramics |
| 96 |
Electrical properties and phase transition behaviors of Sn doped 0.45PZT- 0.55PNN ceramics |
| 97 |
Phase evolution and electrical properties of lead zirconate titanate thin films grown by using a triol sol-gel route |
| 98 |
Properties of Sr- and Sb-doped PZT-Portland cement composites |
| 99 |
Dielectric properties of CaCu3Ti4-xMn xO12 ceramics |
| 100 |
Fabrication of glass-ceramics containing nano-sized lithium niobate crystals |
| ปี พ.ศ. 2551 |
| 101 |
The effect of Zr content on electrical properties of Ba(Ti 1-xZrx)O3 ceramics |
| 102 |
Properties 0-3 PZT-Portland cement composites |
| 103 |
Phase formation and electrical properties of lead-free bismuth sodium titanate-potassium niobate ceramics |
| 104 |
Development of electrical properties in lead-free bismuth sodium lanthanum titanate-barium titanate ceramic near the morphotropic phase boundary |
| 105 |
The fabrication of nanoporous hydroxyapatite ceramics |
| 106 |
Effect of ZrO2 doping in physical properties of barium iron niobate ceramics |
| 107 |
Fabrication of double layers of aramid fiber/alumina/epoxy resin laminate composite using low-pressure technique |
| 108 |
Effects of dysprosium oxide addition in bismuth sodium titanate ceramics |
| 109 |
Mechanical properties and microstructure of aramid/Al2O 3/epoxy resin laminated composites |
| 110 |
Fabrication of 0-3 non-lead based piezoceramic/polymer composites using suction technique |
| 111 |
Preparation of nano-crystalline boehmite as a gamma-alumina source for the production of Na.beta-Al203 solid electrolyte |
| 112 |
Effects of potassium fluoride salt additive on the sintering temperature and dielectric properties of BaFe0.5Nb0.5O3 ceramics |
| 113 |
Preparation and properties of B2O3-Doped Ba(Zr 0.07Ti0.93)O3 ceramics |
| 114 |
Ferroelectric glass-ceramics from the PbO-Bi2O 3-GeO2 system |
| 115 |
Electrical properties and miocrostructures of P2O 5-CaO-Na2O Glasses |
| 116 |
Fabrication of barium zirconium titanate ceramics using ultrasonic ball milling technique |
| 117 |
Phase evolution and physical properties of (l-x)BZT-xBFN Ceramic System |
| 118 |
Ferroelectricity of (1-x)(Bi0.5Na0.5)TiO3 - xBa(Ti0.95Zr0.05)O3 solid solution ceramics |
| 119 |
Synthesis and characterization of nanocrystalline hydroxyapatite from natural bovine bone |
| 120 |
Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites |
| 121 |
Ferroelectric, pyroelectric and dielectric properties of complex perovskite-structured Pb0.84Ba0.16(Zr0.44Ti0.40Fe0.08Nb0.08)O3 ceramics |
| 122 |
Design of portable stroke monitoring care in old human |
| 123 |
Giant dielectric behavior of BaFe0.5Nb0.5O 3 perovskite ceramic |
| 124 |
Effects of heat treatment on spin Hamiltonian parameters of Cr3+ ions in natural pink sapphire |
| 125 |
Low sintering temperature of lead magnesium niobate-lead titanate (0.9PMN-0.1PT) by adding oxide additives |
| 126 |
Structural and piezoelectric properties of (1 - X)PZT-xBFN (x = 0.1 - 0.2) solid solution |
| 127 |
Mechanical properties of hemp fiber composites with carbon nanotubes reinforcement |
| 128 |
Morphotropic phase boundary of lead-free piezoelectric ceramics from BNT-KN system |
| 129 |
Ferroelectric and pyroelectric properties of 0.8PbZr0.52Ti 0.48O3-0.2BaFe0.5Nb0.5O3 ceramics |
| 130 |
Dielectric properties and microstructure of CaCu3Ti 4-xMnxO12 ceramics |
| 131 |
Sintering behavior of the β-alumina solid electrolyte for battery applications |
| 132 |
Structures and properties of lead-free NKN piezoelectric ceramics |
| ปี พ.ศ. 2550 |
| 133 |
Dielectric properties of low temperature sintered LiF doped BaFe0.5Nb0.5O3 |
| 134 |
Microstructure and properties of Pb(Mg1/3Nb2/3)O3-Portland cement composites |
| 135 |
Characterization and properties of Sb-doped BaTi O3 powders |
| 136 |
Effect of milling time on the properties of Pb(Mg1/3Nb2/3)O3 ceramics using the starting precursors PbO and MgNb2O6 |
| 137 |
Effects of rare earth additive (Nd2O3) on microstructure and dielectric properties of lead zirconate titanate ceramics |
| 138 |
Piezoelectric and dielectric properties of (Bi0.5Na 0.5)TiO3-Ba(Ti0.95Zr0.05)O 3 system |
| 139 |
Fabrication and properties of PZT-ordinary Portland cement composites |
| 140 |
Piezoelectric and dielectric properties of Ti rich (Bi0.5Na 0.5)TiO3-Ba(Ti0.95Zr0.05)O 3 system |
| 141 |
Design considerations for aural vital signs using PZT piezoelectric ceramics sensor based on the computerization method |
| 142 |
Effect of pre-heating temperature on the characteristics of PZT thin films grown by using a triol sol-gel route |
| 143 |
Sintering of Fe-doped Bi0.5Na0.5TiO3 at < 1000 °C |
| 144 |
The effect of post-sintering annealing induced extrinsic dielectric properties in PZT-PZN ceramics |
| 145 |
Preparation of sol-bonded lead zirconate titanate ceramics via sol-gel and mixed-oxide methods |
| 146 |
Optimal fabrication and sintering behaviors of ferroelectric PZT/WO 3 ceramics |
| 147 |
Dielectric properties and phase transition of polycrystalline lead zirconate titanate-lead cobalt niobate |
| 148 |
Preparation of lead-free piezoelectric ceramics from (1-x)BNLT-xBT ceramics system |
| 149 |
Design considerations for aural vital signs using PZT piezoelectric ceramics sensor based on the computerization method |
| 150 |
Study of ESR, defect structure and surface morphology of Cu2+ in CdS crystals |
| ปี พ.ศ. 2549 |
| 151 |
Fine grained bismuth sodium titanate ceramics prepared via vibro-milling method |
| 152 |
Solution route synthesis of dendrite Cu6Sn5 powders, anode material for lithium-ion batteries |
| 153 |
The study of dielectric diffuseness in the Ba(Mg1/3Nb 2/3)O3-BaTiO3 ceramic system |
| ปี พ.ศ. 2548 |
| 154 |
Properties of CdS:Ni films prepared by chemical bath deposition method |
| 155 |
Structural and physical properties of Nd-doped Pb(Zr0.52Ti 0.48)O3 ceramics |
| 156 |
Effect of heating rate on the properties of Sb and Mn-doped barium strontium titanate PTCR ceramics |
| 157 |
Effects of alumina surrounding in sintering process on ZnO-Bi 2O3varistors doped with CoO |
| 158 |
Dielectric properties of liquid phase sintered 0.98BaTiO 3-0.02Ba(Mg1/3Nb2/3)O3 ceramic |
| 159 |
Sol-gel synthesis and characterization of BaTi2O5 powders |
| 160 |
Influence of processing conditions on the morphotropic phase boundaries and ferroelectric properties of Pb(Zn1/3Nb2/3)O 3-Pb(Ni1/3Nb2/3)O3Pb(Zr 1/2Ti1/2)O3 solid solutions |
| ปี พ.ศ. 2547 |
| 161 |
Microstructures and positive temperature coefficient resistivity (PTCR) characteristics of high silicon addition barium-strontium titanate ceramics |
| 162 |
Influence of processing conditions on the phase transition and ferroelectric properties of Pb(Zn1/3Nb2/3)O 3-Pb(Zr1/2Ti1/2)O3 ceramics |
| 163 |
Effects of heat treatment on structural evolution and morphology of BaTi5O11 powder synthesized by the sol-gel method |
| 164 |
Synthesis of barium titanate-lead zirconate titanate solid solutions by a modified mixed-oxide synthetic route |
| 165 |
Effect of sintering temperatures on phase transition of lead zirconate ceramics |
| 166 |
Effect of sintering temperature on phase transition and mechanical properties of lead zirconate ceramics |
| ปี พ.ศ. 2546 |
| 167 |
Homogeneous precipitation synthesis and characterization of BaTi5O11 powders |
| 168 |
Effects of Ba(Mg1/3Nb2/3)O3 on microstructure and dielectric properties of barium titanate ceramics |
| 169 |
Perovskite phase formation and ferroelectric properties of the lead nickel niobate-lead zinc niobate-lead zirconate titanate ternary system |
| 170 |
Synthesis, formation and characterization of zirconium titanate (ZT) powders |
| 171 |
Low sintering temperature of lead magnesium niobate-lead titanate (0.9PMN-0.1PT) by various oxide additives |
| ปี พ.ศ. 2545 |
| 172 |
Microstructure, piezoelectric properties and phase transition of (Pb 0.90Ba0.10)ZrO3 ceramics prepared by solid state reaction method |
| 173 |
Atomic force microscopy imaging and cutting of beaded carbon nanotubes deposited on glass |
| 174 |
Effects of calcination temperature on phase and microstructure evolution of BaTi4O9 powders |
| 175 |
Production and characterization of beaded nanofibers from current heating of charcoal |
| ปี พ.ศ. 2544 |
| 176 |
Effect of the particle size of PZT on the microstructure and the piezoelectric properties of 0-3 PZT/polymer composites |
