| ชื่อเรื่อง | : | Preparation Of In-Situ Carbides Reinforced Hybrid Copper-Based Composite By Mechanical Alloying And Its Characterization |
| นักวิจัย | : | Le , Minh Hai |
| คำค้น | : | TN1-997 Mining engineering. Metallurgy |
| หน่วยงาน | : | Universiti Sains Malaysia, Malaysia |
| ผู้ร่วมงาน | : | - |
| ปีพิมพ์ | : | 2553 |
| อ้างอิง | : | http://eprints.usm.my/42285/1/Le_Minh_Hai24.pdf , Le , Minh Hai (2010) Preparation Of In-Situ Carbides Reinforced Hybrid Copper-Based Composite By Mechanical Alloying And Its Characterization. Masters thesis, Universiti Sains Malaysia. |
| ที่มา | : | - |
| ความเชี่ยวชาญ | : | - |
| ความสัมพันธ์ | : | http://hdl.handle.net/123456789/6655 , http://eprints.usm.my/42285/ |
| ขอบเขตของเนื้อหา | : | - |
| บทคัดย่อ/คำอธิบาย | : | The goal of this research work is to investigate the feasibility of the synthesis of two distinct in-situ carbides (NbC and TiC) simultaneously in a copper matrix via mechanical alloying and powder metallurgy from elemental powders of Cu, Nb, Ti and graphite. Three mixtures of starting powders with compositions corresponding to Cu-10vol.%NbC-10vol.%TiC, Cu-15vol.%NbC-15vol.%TiC and Cu-20vol.%NbC- 20vol.%TiC were mechanical alloyed using a planetary ball mill for 5, 10, 20 and 30 hours. The as-milled powders then were cold pressed at compaction pressure in range of 500-1000 MPa and sintered in a vacuum sintering furnace for 1 hour at different temperatures from 700 to 1000oC |
| บรรณานุกรม | : |
Le , Minh Hai . (2553). Preparation Of In-Situ Carbides Reinforced
Hybrid Copper-Based Composite By Mechanical
Alloying And Its Characterization.
กรุงเทพมหานคร : Universiti Sains Malaysia, Malaysia. Le , Minh Hai . 2553. "Preparation Of In-Situ Carbides Reinforced
Hybrid Copper-Based Composite By Mechanical
Alloying And Its Characterization".
กรุงเทพมหานคร : Universiti Sains Malaysia, Malaysia. Le , Minh Hai . "Preparation Of In-Situ Carbides Reinforced
Hybrid Copper-Based Composite By Mechanical
Alloying And Its Characterization."
กรุงเทพมหานคร : Universiti Sains Malaysia, Malaysia, 2553. Print. Le , Minh Hai . Preparation Of In-Situ Carbides Reinforced
Hybrid Copper-Based Composite By Mechanical
Alloying And Its Characterization. กรุงเทพมหานคร : Universiti Sains Malaysia, Malaysia; 2553.
|
ridm@nrct.go.th ระบบคลังข้อมูลงานวิจัยไทย รายการโปรดที่คุณเลือกไว้
