ridm@nrct.go.th   ระบบคลังข้อมูลงานวิจัยไทย   รายการโปรดที่คุณเลือกไว้

Effect of nitridation and carburization of γ-TiAl alloys on wear resistance

หน่วยงาน มหาวิทยาลัยเชียงใหม่

รายละเอียด

ชื่อเรื่อง : Effect of nitridation and carburization of γ-TiAl alloys on wear resistance
นักวิจัย : Boonruang C. , Thongtem T. , McNallan M. , Thongtem S.
คำค้น : -
หน่วยงาน : มหาวิทยาลัยเชียงใหม่
ผู้ร่วมงาน : -
ปีพิมพ์ : 2547
อ้างอิง : 0167577X , 10.1016/j.matlet.2004.05.067 , MLETD , http://www.scopus.com/inward/record.url?eid=2-s2.0-4344641408&partnerID=40&md5=e129ffb47a0072c0e85db85b852cd25b , http://cmuir.cmu.ac.th/handle/6653943832/6634
ที่มา : -
ความเชี่ยวชาญ : -
ความสัมพันธ์ : -
ขอบเขตของเนื้อหา : -
บทคัดย่อ/คำอธิบาย :

The 1000-1300 K nitridation and carburization processes of MJ12 (Ti-47Al-2Nb-2Cr) and MJ47 (Ti-47Al-2Nb-2Mn+0.8TiB2) were studied in the purified ammonia and acetylene. Flow rate of the ammonia was kept constant at 10 cm3 s-1 and that of the acetylene was kept at 0.01, 0.03 and 0.05 cm3 s-1. The properties of the alloys were extensively analyzed. The Knoop hardness values were increased with increase in temperature and acetylene potential. A WC pin-on-disk wear rate was reduced by one or two orders of magnitude in comparison with the untreated alloys. In addition, the surfaces of the alloys were characterized using the XRD, SEM and EDX analyzers to determine the new phases formed. © 2004 Elsevier B.V. All rights reserved.

บรรณานุกรม :
Boonruang C. , Thongtem T. , McNallan M. , Thongtem S. . (2547). Effect of nitridation and carburization of γ-TiAl alloys on wear resistance.
    เชียงใหม่ : มหาวิทยาลัยเชียงใหม่ .
Boonruang C. , Thongtem T. , McNallan M. , Thongtem S. . 2547. "Effect of nitridation and carburization of γ-TiAl alloys on wear resistance".
    เชียงใหม่ : มหาวิทยาลัยเชียงใหม่ .
Boonruang C. , Thongtem T. , McNallan M. , Thongtem S. . "Effect of nitridation and carburization of γ-TiAl alloys on wear resistance."
    เชียงใหม่ : มหาวิทยาลัยเชียงใหม่ , 2547. Print.
Boonruang C. , Thongtem T. , McNallan M. , Thongtem S. . Effect of nitridation and carburization of γ-TiAl alloys on wear resistance. เชียงใหม่ : มหาวิทยาลัยเชียงใหม่ ; 2547.